The use of electric household appliances can often be costly in terms of both energy and money. However, with simple steps, you can reduce energy waste, lower your electricity bills, and extend the lifespan of your household appliances! Let's take a look at tips for each device.

Cooling & Freezing

Cooling devices, such as the refrigerator, the freezer, or a wine cooler, are devices that consume a large percentage of energy in a household. With simple methods, you can create the right conditions to improve the efficiency of these devices and minimize waste.

• Set to the right temperature: A good cooling temperature is 3–4°C, while for freezing, -18°C is ideal. Colder temperatures in both cases consume much more energy without offering any additional benefits to the products. On the contrary, they can be detrimental to sensitive foods, such as vegetables.
• Place the refrigerator in a cool and shaded area: It is advisable to place the refrigerator strategically, away from other heat-emitting appliances, such as the stove or microwave. It is also good to avoid direct sunlight for a longer lifespan of the appliance.
• Make sure it is full, but not overloaded: Certainly, an overloaded refrigerator requires more energy to maintain the food. However, as strange as it may seem, an empty refrigerator for long periods can cause damage and problems, leading to the need for a new one very soon. For smooth operation, keep your refrigerator full, but not overloaded!
• Defrost frequently: If your refrigerator is old and needs defrosting, do not neglect to do it, at least with every change of season or if the ice exceeds 6mm. If we caught you reading this article before purchasing a new refrigerator, then the first advice we will give you is to look for refrigerators with No Frost technology, with which you will never need to defrost again!

• Close the door: One of the most common mistakes we all make is standing in front of the refrigerator with the door open and staring inside "for hours." It’s not going to talk to you or answer the question "what are we eating today." So, before you open the fridge or freezer, it's best to think about what you need, grab it, and close the door tightly to minimize the loss of cool air.
• Use the smart features: If it's a device with smart capabilities and functions, then you should take advantage of them. You can create a shopping list for the supermarket, keep track of the products inside the device, or remotely adjust the temperature, all of this and much more without needing to open the device's door.

Washing & Drying Clothes

In the list of devices with high energy consumption, we naturally include the washing machine, the dryer, and the washer-dryer. They are not devices with continuous energy consumption, but improper use can lead to energy loss. Let's take a look at some tips for efficient use.

• Wash/dry the required amount: Try not to overload the appliances, but also avoid running them with only a few clothes, as this wastes energy and costs you money. If you still need to wash or dry a small amount of clothes, adjust the water level accordingly, as well as the washing time. 
• Wash with cold water or low temperature whenever possible: Washing at low temperatures or even better with cold water consumes significantly less energy compared to washing at high temperatures.
• Set to high spin for fabrics that allow it: Clothes like towels can be washed at high spin speeds, so they require as little drying time as possible.

• Clean regularly: Both the washing machine and the dryer are appliances that require frequent maintenance and cleaning. Clean the washing machine filter and run a wash without clothes using a special washing machine cleaner or vinegar and baking soda, once a month. For the dryer, simply clean the lint filter before each wash.

• Air out the clothes: On days when you have the opportunity to hang and air out the clothes, prefer it over putting them in the dryer.

Washing Dishes

Washing dishes is a contentious issue. Many argue that hand washing is a waste of time, water, and money, while washing with a dishwasher leads to significant energy consumption. How can you mitigate this consumption and make dishwashing more efficient?

• Wash with a full load: Try to fill the dishwasher before each wash for optimal energy consumption. If you have a newer model dishwasher, look for the half load program. This is a program that can wash half the amount of dishes that the dishwasher can hold, adjusting the time, water quantity, and energy consumption.
• Let the dishes air dry: Avoid high temperatures and programs with intensive drying cycles. If your device is smart, you can simply set the time you want the wash to finish, so you can open the door and let the dishes dry on their own.

• No need to rinse the dishes: No matter how difficult this "bad habit" may be, dishwashers now allow you to place dishes that are only partially dirty, without needing to scrub or soak them beforehand. Just rinse them with a little water and place them directly in the dishwasher.
• Clean often: Like all appliances, it requires good cleanliness and maintenance, as food residues can often get trapped in hard-to-reach areas. Use a special dishwasher cleaner once a month to ensure a longer lifespan for your appliance.

Kitchen & Cooking

Cooking is yet another process that can lead to energy loss in a home. With the proper use of appliances, such as the oven, the cooktops, or the range hood, you can reduce consumption, improve your electricity bills, and cook faster and more efficiently.

• Choose the right size of cookware for your burners: Use each pot based on its size on the corresponding burner. For optimal energy consumption, do not use smaller cookware on larger burners. If you have or are considering purchasing induction cooktops, then you have solved this problem, as this type of cooktop provides heat only to the surface covered by each pot.

• Preheat your oven only when necessary: You don't need to preheat the oven for hours and for all foods. Try to do it only when it's really necessary. If you want to reheat some food, make sure to take it out of the fridge and let it reach room temperature. This way, it will heat up faster and you'll consume much less energy.
• Don't open and close the oven door frequently: Most ovens now allow you to monitor the cooking progress since they have a glass door. Therefore, you don't need to keep opening it constantly.
• Turn off the burners a little earlier: For optimal energy consumption, try to turn off the burners 2-3 minutes before your food is done. Then, let the pot with the food sit on the burner to finish cooking with the residual heat, without wasting any energy.
• Choose the appropriate extraction power for your space: If you are looking for a hood, try to find the right one for the size of your space. The larger your space, the greater extraction power your hood needs to have. 

• Set the extractor to low speed: Try to avoid using the extractor at high or intensive speed for long periods, as it will waste a lot of energy. Opt for a gentler speed and choose to open a window to adequately ventilate the space.

General Tips

• If you are going to buy a new appliance, prefer one with the highest possible energy efficiency rating. These appliances can manage energy better on their own and have features and capabilities that can optimize each task.
• Choose to use your household appliances during off-peak hours. Many energy providers offer this option, suggesting specific hours late at night or early in the morning.
• Maintain your appliances according to the manufacturer's instructions. This way, you ensure their efficiency and enhance their lifespan.