Thanks to Inverter technology, it maintains a stable temperature and consumes less energy than regular instant water heaters, as it only uses the necessary power to heat the water to the desired temperature.

The operating power and consumption are controlled by the electronic brain according to the temperature and flow of the incoming water, in order to precisely select the desired temperature and maintain it stable.

The selected temperature can vary between 35 degrees C and 55 degrees C, while also having 5 temperature memories depending on the desired use:

• 35 degrees C for hand washing
• 38 degrees C for shower
• 42 degrees C for shower
• 48 degrees C for kitchen
• 55 degrees C for other uses

• Flow switch - activates the device only when there is water flow.
• Safety thermostat - protection against overheating
• Inlet temperature sensor - controls the temperature of the water entering the device
• Outlet temperature sensor - controls the temperature of the water exiting the device

It is central and can be used either as the main water heating option for your home, or as a supplementary. It can provide hot water throughout the house for your everyday needs, as long as there are suitable pipes for the distribution of hot water. This may result in heat and energy losses due to distance.

The instant water heater is a type of heater that heats water in real time. It only heats the water that passes through it at that moment. There is no storage tank for hot water. This has many advantages, such as energy saving, as only the water that is used is heated, as well as longer lifespan, as there is no water tank and accumulation of salts in the heating element and other components.

It operates on electricity and is three-phase, so a three-phase power supply is required.

The instant water heater has a cold water inlet pipe, which passes through the heating element, heats up, and comes out in the hot water outlet pipe. A necessary condition for the initial operation of the instant water heater is that the pressure of the cold water inlet is not too low.

The temperature of the water is regulated by a thermostat, so as not to exceed a maximum value. The temperatures reached by the hot water are pre-set so that someone can use the hot water directly, without the need to mix it with cold water.

The maximum temperature that can be reached for hot water production is 55 °C, while the maximum flow rate of water reaches up to 8 liters per minute. Indicatively, 38-42 °C degrees are the standard for shower use.

• It is small in size and does not take up much space.
• There is no energy loss, as only the water that is being used is heated at that moment. Therefore, there is savings on the electricity bill. In a traditional water heater, the unused hot water goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold water, as in a traditional water heater. This results in water savings, in addition to electricity savings.
• There is no need to wait for the water to heat up. As soon as we open the faucet, hot water starts running in a few seconds. A traditional water heater takes some minutes, depending on its size.
• The hot water never runs out. As long as we have the faucet open, we will have hot water.