Quite a good machine that solves hands. For exclusively amateur use. The cutting of the woods is not absolutely accurate because the indications "lose" a little, while the guides "play" a little

It cuts wood like paper. Even with the 24-inch blade, the cuts are perfect. It is a powerful machine with good sawdust collection. However, it requires adjustment in the angles and a makeshift guide for vertical cuts. The only thing I did not expect to find was that the main body of the machine is plastic. It has metal legs, a metal cutting base on top, but a plastic body. If the plastic casing breaks, the machine will have a problem because it is not repairable. That is the only reason why it gets 4 stars. The use of plastic in such machines is not justified, supposedly to reduce costs. Because the price ranges around 180 euros, which is not a small amount

I use it intensively as an amateur. The machine is very powerful and its cuts are effortless. If you have some time to make your own side fence and sled for vertical cuts, then it becomes perfect. Its problems are the small fence, which needs replacement with a handmade one, and of course the fact that it constantly needs calibration, which can become tiresome after a while. I'm not sure if I would recommend it.

For the price of 138 euros, it is simply a wonderful product. It cuts effortlessly and without any issues on plywood and solid Swedish wood that I tested with the basic cutting disc. I will come back for cutting melamine with the appropriate disc and a photo of the table base that I constructed. I highly recommend it for DIY projects and more.

As a tool, it has power. I have been using it for 4 years and it has not let me down. Of course, with the purchase, it requires a new disk with more teeth. However, its main disadvantage is the accuracy, as it loses from everywhere, either in straight cuts or in inaccuracies. I wouldn't buy it again and would spend a little more money on something better!!!

εχω το πριονι 3 χρονια περιπου... εχω αφαιρεσει τα ποδια κ το εχω βαλει κατω απο τον παγκο του εργαστηριου... δουλευει χωρις κανενα προβλημα ακομα κ σε σκληρα ξυλα οπως ιροκο, ευκαλυπτο... βεβαια εχω φτιαξει καινουριο οδηγο... του δινω τα 3 αστερια για το μοτερ... αλλα κατα τα αλλα ειναι μικρο κ οι οδηγοι δεν ειναι πολυ ακριβεις... η αναροφηση ειναι οκ ο δισκος ειναι μετριοσ αν κοβετε πολεσ μελαμινες καλο ειναι να τον αλλαξετε.... θπ οψην οτι ειμαι ερασιτεχνης.

I made a modification and put something from my workshop bench, so I have created new guides... the old guides were shaking, resulting in not cutting the same pieces. I have had it for about 2 years and after changing the disc and the guides, I can say that its power is sufficient for the hobbyist use I give it... it throws the sawdust behind unless it gets stuck and fills up, then it goes everywhere so it's good to have a connected vacuum... if you are in a small enclosed space...

Very good tool for the money. I changed the disk and put a better one with 60 teeth. I made several cuts on melamines and did not encounter any particular problem.

After 4 months, although I bought it with skepticism based on the previous reviews I read, in the end its cuts are accurate and without any problem. The only change it needs is in the blade because it has few teeth.

A machine that will never cut two pieces the same. The guides are terrible, there is no accuracy in anything. In order not to throw it away, I made a new table from plywood larger in dimensions (of course, I lost 18mm from the cutting height but it's okay) and new guides made of aluminum and iron profile, now I cut almost up to 60cm width. The disc it has on top is ridiculous compared to a professional disc. After changing the table, the guide, and the disc, I can say that it cuts perfectly. But with 145€ you get what you pay for. At least the guide should be correct regardless of the cost.

Πολύ δυνατό σαν μηχάνημα δεν νομίζω να ζοριστεί ιδιαίτερα σε κανένα κόψιμο,ο πάγκος εργασίας είναι αρκετά μεγάλος και τα κοψίματα καθαρά.Το βασικότερο μειονέκτημα του είναι η ακρίβεια,θέλει μεγάλη προσοχή στις μετρήσεις και να μην υπολογίζει κανείς στους χάρακες τις συσκευής δεν έχουν καμία σχέση με τις πραγματικές τιμές π.χ. στο δικό μου μηχάνημα για να είναι ο δίσκος κάθετα στις 90 μοίρες ο ρυθμιστής δείχνει 2+ μοίρες επίσης ο πλαϊνός οδηγός δεν είναι καθόλου σταθερός,αυτά πληροφοριακά γενικά αξίζει τα χρήματα του και με το παραπάνω και με αρκετές δοκιμές θα δώσει πολύ καλά αποτελέσματα.