Surface preparation
To ensure proper adhesion of the product, the surface to be painted must be cleaned from dust, grease, oils, peeling old paints, rust, mold or moisture residues.
For new or porous surfaces, apply the corresponding recommended primer of the product (Step primer, Life dur water)
Apply the product in 2 coats (after thoroughly mixing it) which should be spaced 1 - 2 hours apart.
The product reaches its full mechanical strengths after 20 - 30 days.
Application conditions
Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is higher than 80%. Adverse conditions during application can alter the final properties of the paint.

• Brush
• Roller
• Spray gun