Set the delivery location to see products according to your choice.
AustriaEnglish
BelgiumEnglish
BulgariaБългарски
CroatiaEnglish
CyprusΕλληνικά
CzechiaEnglish
EstoniaEnglish
FinlandEnglish
FranceEnglish
GermanyDeutsch
GreeceΕλληνικά
HungaryEnglish
IrelandEnglish
ItalyEnglish
LatviaEnglish
LithuaniaEnglish
LuxembourgEnglish
MaltaEnglish
NetherlandsEnglish
PolandEnglish
PortugalEnglish
RomaniaRomână
SlovakiaEnglish
SloveniaEnglish
SpainEnglish
SwedenEnglish
© 20[0-9]{2} Skroutz SA All Rights and Lefts reserved. FAQ | Terms of use | Privacy Policy | Cookie Policy
Key features:
Sold by
Stock 6 pieces
Skroutz Buyers Protection & 2 years warranty
Intermediate Switches
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Smart Hubs
Smart Hubs
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Prices are calculated for:Malta, Other Payment Options
Temperature and humidity sensor. This smart device detects and records temperature and humidity in real-time. It offers accurate temperature and humidity data, thanks to its industrial-grade sensor construction, with exceptional precision.
The Sonoff SNZB-02 is a ZigBee temperature and humidity sensor that can work seamlessly with the SONOFF ZigBee Bridge to monitor changes in temperature and humidity in your home, and all measurements can be checked in real-time on eWeLink.
Measure temperature and humidity in real time and sync the data to your mobile phone in no time.
To ensure the ideal temperature and humidity in the apartment, simply activate the sensor that starts the fan when the room temperature is 28°C, and the purifier will start operating automatically when the air humidity is below 45% RH.
The adhesive strip on the back of the sensor is strong and flexible, allowing for easy and quick installation on any surface in the room.
The application sends notifications about the sensor's low battery level (10%).
No need to worry about your device's low battery level - you will always be informed with the application.
The sensor can be shared with the family, allowing them to monitor the room's temperature and humidity on their phones without the need for device pairing.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Very good, small and expensive.
Now you can't connect them to homeassistant, you won't find a cheaper sensor
If it disconnects once, it is likely to stop responding until it is reset.
In the meantime, it drains the battery like crazy.
The same problem occurs with SonOff's WiFi and the SNZB-01 switch.
Overall, SonOff has been a hassle and has disappointed me.
It is unreliable.
Very bad. You set it up and it plays for a day and then breaks again. You set it up again and the same thing happens. It's not a battery issue and I have also bought other zigbee products that work fine. Maybe this one breaks because it sends temperature periodically. In any case, it is not reliable
Attention, it does not work on its own, it requires an additional component (bridge) to connect to the mobile phone. This component requires changes to the Wi-Fi and it is a huge mess. It requires 2.4 GHz and not 5.0 GHz, and good luck trying to navigate through the router settings to figure it out
The only way to stay connected is a patent to continuously receive power from a USB port with a conversion of 5V->3V. Otherwise, with a battery, it constantly loses connection with the antenna at 1 meter...
It connected very easily to the Sonoff ZBBridge Smart Hub. The measurements appear accurate compared to other thermometers.
It is unacceptable that it did not come with a battery (cr2450) and had to be purchased separately (not mentioned anywhere).
I have had it installed for 5 months and it works flawlessly.
What I don't like: Google Home only reads humidity while Alexa only reads temperature. And both together only in ewelink
It measures accurately and temperature and humidity. I put it in November and the battery still shows that it is full. Therefore, I recommend it. Better placement not near a window because the measurements will not be accurate.
Honest temperature/humidity sensor.
I don't have an opinion yet on how long its battery lasts.
Edit:
If it disconnects (which has recently started happening), it never reconnects, it needs re-pairing.
Edit 2:
When it disconnects, it drains the entire battery. It's not worth it after all.
If you upgrade to ewelink, you will have to pay 11.00 euros to unlock the program's capabilities for one year. Then you will be able to set up the sensor, otherwise don't get it.
Easy installation and synchronization. Works fine with Google Assistant and Alexa. But when going about 10 meters away (2 rooms), where it was far from the hub, it couldn't transfer data.
Having an old electronic thermometer, the difference was very small, 0.3-0.5, it just takes time to synchronize with the room temperature when you open it (from 24 degrees Celsius when I opened it, until it reached 18.4 degrees Celsius in the room, it took over 20-30 minutes), and yet I'm not sure how much difference it has for humidity. I need to find a way to check it with other devices.
Unfortunately, they break for fun. I bought 4, one broke in the first week, I replaced it, and 2-3 months later another one broke. Also, the battery measurements are completely random, it can show 70% and the next day 90%. As for temperature and humidity measurements, they seem relatively reliable, not very accurate but at least the trends are correct.
UPDATE: Now 3 out of the 4 have broken (or 4 out of 5, if you consider that one had already been replaced). Don't waste your money.
Unfortunately, after a few months, problems started with disconnections and battery exhaustion. In total, I bought 6 and 3 of them have gone offline, and with mathematical precision, I see the other 3 also going offline in a few days. It's a shame because I really like Sonoff, as well as its ewelink application
For now, it works great and provides measurements every 5 minutes. It has been seamlessly connected to SmartThings.
I bought 2 for testing, I have them placed as far away as possible from the bridge, 10 meters with 2 rooms in between, one and the other in the bathroom, 8 meters and one room in between.
For two days now that I have been monitoring them, they work perfectly. If they continue like this, I will also buy the remaining 4 that I need.
I will come back with an update.
Regarding the frequently mentioned sensor issues (such as range/low battery), I would recommend not having the Zigbee Bridge Hub near the router. I have also experienced such issues, and when I moved the Zigbee Bridge away from the router, I never had low battery or disconnection problems again (it is possible that the router's 2.4GHz weakens the ZigBee signal reception since they use the same band). If frequent disconnections occur, I recommend removing the device from the ZigBee Hub (via eWeLink) and reconnecting it; restarting the Hub temporarily solves the issues. Also, try to place the ZigBee Bridge in the most central location possible in relation to the sensors you have placed in your space.
I have installed 5 sensors throughout the house (one outside) for 6+ months, and I am satisfied with their performance considering the price. The battery level remains high.
The 4 stars are because I would prefer direct connection with Google Home / Alexa rather than through the eWeLink app.
I bought it 6 months ago and I can't say that I am satisfied.
+ The good thing is that the measurements are relatively close to reality (compared to an analog and digital thermometer).
But...
- Very limited range, if it moves more than 5 meters away from the zigbee hub, it loses signal and when the battery is more than 2 meters away from half, it doesn't connect, nor is there any button for reconnection...! The only solution (besides reset) is to remove and insert the battery, although it doesn't always work...
- Also, the Sonoff application is very limited and to have all the capabilities, you have to become a subscriber, something that is free with other manufacturers.
For the above reasons, I do not recommend it, and generally not Sonoff, as with a little more money you can buy better devices with many more automation capabilities without a subscription and more reliable.
I created a network of four devices and they work flawlessly without any disconnections. Another excellent product from Sonoff. They are compatible with Alexa and can be used in scenarios. They consume minimal energy due to the Zigbee protocol.
Although I have been a fan of Sonoff for years with several switches, I have been completely disappointed by the Zggbee series.
Constant disconnections of the temperature sensor and the door contact (even though they are within 5 meters from the Sonoff Hub pro and I have reconnected them three times in the four days that I have had it).
Try another brand for Zigbee protocols.
Reliable temperature and humidity sensor. It only works through the Sonoff ZBBridge device and not directly connected to the app. There are no disconnections and it can participate in multiple scenarios with other Sonoff smart devices.
I bought 2 last week but I can't say that my experience is very good... They go offline several times, resulting in the only way to restore them is to reset them! This means that if scenes have been created, they will have to be recreated from scratch because they lose the devices.
Update 16/11/22
Stay away! Completely unreliable temperature. Although a fan of Sonoff, this particular device disappointed me
I have purchased a total of 3, one for each room of the house, and I am very satisfied. It has temperature and humidity display. The next step is to automatically control electrical devices in combination with POWR2.
Update: I have integrated them with Home Assistant and they work perfectly so far. You can turn on electrical devices based on the temperature or control them through a thermostat via HA
I have purchased 4 together with the ZigBee Bridge and I had no issues. In fact, one of the sensors is located outside the house in an adjacent storage room.
Unfortunately, they no longer come with a battery (CR2450)
It did not satisfy me at all compared to all the other products from the same company that I have.
Measurement deviations or zero readings, disconnections, and it did not cooperate easily with the company's Gateway as well.
(possibly defective, will be checked)
Cute sensor, combined with aeotec's SmartThings hub. However, its functionality is somewhat strange, as it sends measurements approximately every half an hour and in the meantime it appears offline, as if it goes into sleep mode - so it may not be suitable for someone who wants more immediate/frequent measurements. Also, the measurements are probably not 100% accurate, but the deviation is small, around 0.5-1 degree.
Simple and reliable at an excellent price. I haven't noticed any difference in measurements compared to the Aqara equivalent.
The sensor works in connection with Sonoff's zigbee usb stick as a coordinator with zigbee2mqtt in Home Assistant. I have been using it flawlessly for about a month now and it seems to have good accuracy compared to other thermometers I have. It is also very small and discreet. Overall, very impressed.
It works perfectly for a month now, with automation turning on a socket for a heater according to the temperature. Note that it requires the bridge
It connected immediately and provides accurate temperature and humidity compared to others I have at home. The Sonoff bridge is required for it to work. Its battery lasts a very long time.
It shows a temperature 0.5 degrees Celsius higher than a conventional thermometer.
You can use it as a trigger in scenes on eWelink.
Alexa does NOT see it as a trigger.
Edit after 2 months... it constantly disconnects!!
I do not recommend it (even though I am a fan of Sonoff).
It does NOT synchronize with Xiaomi Gateway. I know that it is not a fault of this product but of Xiaomi, but I am writing it so that others do not make the same mistake...
Verified purchase
I have filled my house with SonOff
Be the first to leave a comment!