Set the delivery location to see products according to your choice.
AustriaEnglish
BelgiumEnglish
BulgariaБългарски
CroatiaEnglish
CyprusΕλληνικά
CzechiaEnglish
EstoniaEnglish
FinlandEnglish
FranceEnglish
GermanyDeutsch
GreeceΕλληνικά
HungaryEnglish
IrelandEnglish
ItalyEnglish
LatviaEnglish
LithuaniaEnglish
LuxembourgEnglish
MaltaEnglish
NetherlandsEnglish
PolandEnglish
PortugalEnglish
RomaniaRomână
SlovakiaEnglish
SloveniaEnglish
SpainEnglish
SwedenEnglish
© 20[0-9]{2} Skroutz SA All Rights and Lefts reserved. FAQ | Terms of use | Privacy Policy | Cookie Policy
from Stax Group
Selected Store
Stock 2 pieces
Skroutz Buyers Protection & 2 years warranty
CPU Processors
Power Supplies
CPU Processors
Memory RAM
Motherboards
Prices are calculated for:Malta, Other Payment Options
The Stronghold is a Midi Tower with a tempered glass side window, fan filters, water cooling capability, and cable management.
Supports:
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I am the owner of this case from 2020-2021. I recently decided to change my graphics card. As someone else mentioned, there is no way to fit a 2-slot graphics card without cutting part of the case. Between the 2 brackets that come out, there is always a thin bracket that does not come out (I am referring to the bracket with the hole for the screw), which obstructs the card. A cutter was needed to remove it, otherwise the card would not fit.
Additionally, there is a design flaw as in order to remove the brackets, they slightly scratch the motherboard on the edge. When I had a 1-slot card, I had no issues. The fact that I had to dismantle the case to fit the 2-slot card is a significant problem.
The PC case is very bad, if you have a 2-slot GPU you have to break part of the case (it doesn't have screws to remove it, you have to pull it out) the airflow is mediocre and the case doesn't come with a special screwdriver for the motherboard pins. It takes a long time to fix it and it's most likely that you'll have to pay someone to fix your computer
Last update and finished is high end, there are no words, I just open it to admire it sometimes
It is a simple jewel that has been through hardship because I am clumsy and it doesn't even have scratches
Spacious for its size, quality for its price. The only issue is the airflow, which is mediocre. Everything was fine when I had an APU, but once I added a separate GPU, the temperatures rose significantly despite adding additional fans. I switched to the MX410 and was saved - although it's not as spacious, it's a cooler case. Conclusion: if you have an APU or a simple GPU that doesn't generate too much heat, you'll be fine. But if you want to install a good GPU, get a case with a mesh front.
Bought 1 and a half years ago.
It has a smoked tempered glass, a large length for the graphics card.
It has a dust filter on the top and on the power supply.
The only negatives are that its fans are not quiet, it does not have good airflow from the front, and the brackets for the graphics card cannot be reinserted and should not be removed once the motherboard is installed.
Nice minimal box. The USB ports and buttons are in an accessible position. It's dark inside due to the color, maybe I would choose white, but it's a matter of taste. The only negative is that I would prefer an easier solution for installing hard drives at the bottom. Nothing tragic, they just currently require screws that are included in the package. It would also be good if you didn't have to break the metal back for the cards. They won't go back in if you do.
Good case for a basic workstation PC, with the glass being a nice addition. Decent airflow, not perfect due to the strange placement of the front vents. Plenty of space for multiple components, I have 4 drives (2 HDD, 2 SSD), 2 extra cards and they fit quite well, while having satisfactory space for cable management. I had some issues with the mediocre quality front I/O, as well as with the LED lights that illuminate like beacons at night.
edit 1 year later: overall, the airflow is not exemplary. Its front side is quite restrictive. I didn't have any problems, but if someone relies on high airflow for strong cooling, they may need to reconsider.
It's an awesome comfortable box, my computer doesn't heat up at all!! Also, it's very cheap!!
It's excellent, the best for its price, it may not have RGB (which everyone is now looking to get in a case) but you can add RGB fans and with the glass it has, it will look amazing
Truly one of the best purchases you can make for 50 euros, this case has everything you need. The two fans do their job well and the magnetic filter on the top is very useful and easy to clean. There is also satisfactory space for cables at the back. It's like the NZXT for the poor, with all its positives. The only negative is that the plastic on the front cover cuts easily at the corners. I've had to cut it 5-6 times because I have it next to my feet.
Update: One relatively bad thing about it is that it collects a lot of dust from the front cover, which doesn't have a filter. If you put a mesh on it, it's okay, as well as from the gap of the glass with the case.
At around €45, I don't think there is a better case, but it's good to know some things about the case that are not often mentioned.
1) It comes with exactly the number of screws needed to install the basic components. If you want to add a second hard drive, for example, you will need to purchase the appropriate screws yourself.
2) The pre-installed front fan is placed in the lowest position, which would cool any HDD you install. It cannot be placed elsewhere as it has specific screws that do not fit in other places. So, you need to purchase extra screws (again) to place it elsewhere, or the fan remains in a suboptimal position for cooling the space.
3) The case has only one side grille for air intake, which does not have a dust filter.
4) The brackets at the back from which the graphics card outputs protrude are not repositionable. They break. Once and for all. So, first you weigh how many and which ones you need to remove to install the card, and then you break them.
5) In five months, the power (blue) and disk LED (red) initially weakened and then died. These lights are not particularly useful, but it is something that was observed IN BOTH STRONGHOLD CASES I PURCHASED.
6) The cables of the case that connect to the motherboard for USB ports, audio, lights, etc. are attached to the front panel of the case, meaning they come out with it. Therefore, if someone wants to remove the front panel to clean, for example, the front fans of the case, they need to first remove the cables from the motherboard and then reattach them.
Pay very close attention to how you remove the screws to place all your cards. I almost ruined my 300+€ motherboard!!! Overall, the construction is mediocre for the price...
The only complaint is the very intense blue light that illuminates the entire room. Otherwise, it is very beautiful and convenient.
2. Be careful with the glass, I managed to break it while removing it one day, it fell on the tile and although it fell quite softly, it shattered immediately.
For the price I got it at 50 euros, it's a very good economical solution. It has enough space for cables. The airflow is moderate due to the front panel which doesn't have any openings except on the sides. Plus, it has a regular glass and not plexiglass.
I have set up several systems in cheap cases, and this one is by far the most cost-effective. From now on, I will only use this
It's great, perhaps the best solution for the money, it fits almost all cards and is very spacious for cable management
I received and installed the Atx motherboard with the modular power supply, everything is complete, but it requires a bit of imagination to make good cable management. The quality is great, but I haven't formed an opinion on the airflow yet (it already has 2 fans), but since I have an Apu and no dedicated graphics card, I don't think I'll have a problem. For the price, it's excellent. I was torn between this and the Cougar G, but after seeing a Greek review for this one, I was convinced
Average case. The fans to get out make you lose faith. And quite average airflow with liquid cooling 2700 with 2 fans the cpu reaches 70 degrees under load and the card 84 (if I leave it from msi it hits 92)
As soon as I got it, I improved the airflow a bit. Once I set up the setup, I'll tell you the rest. Overall, for its price (45€-50€), I think it's worth it.
Very good for the money it costs... Beautiful, minimal but with enough and comfortable spaces for the power supply, graphics card, disks and cable management... Beautiful side window made of tempered glass, filters for fans, capable of accepting water cooling... Includes 2 fans, 1 front and 1 rear. I added 2 more front and 1 on top: total 5. In general... a decent purchase!!! It's definitely not the best Midi Tower case... but for its price, it looks very good... and one of the most beautiful...! :-)
If I knew the difficulties I would face with this case, I really wouldn't prefer it.
If you attach the motherboard and see approximately where the graphics card falls, you will see that you cannot remove the bracket... because first see where the graphics card falls, remove the bracket and then attach the motherboard. I almost broke my motherboard because of the case.
Three disks don't fit in at all... the special screws that are given to you to attach the disks are for 2 disks and not for three.
Basically, it's like fake. The only thing worth it is the glass side.
I do not recommend this case. It's simply not practical at all.
No relation to reality with what we see in the photos and in the reviews on YouTube.
We'll be back on 25/04... This fake case doesn't know what single means! If you have HDD mechanical disks... You'll just hear them working very well! In the previous case I had, you couldn't hear anything!
Very good guys especially if you're into minimalism. Personally, my motherboard only fit one fan so I gave the other one to my dad and I installed 3 120mm fans directly to the PSU molex. The case also has many rails for cable management and everything is well organized in general
Quite good for its price, it just doesn't have the best airflow and its stock fans break easily. I believe it's worth its price
First of all, up close it looks much nicer, but personally I would prefer the white one. It has enough space for cables and the power supply. The only negative is that the space for the hard drive is right next to the power supply and also the cable for the hard drives to the motherboard must be angled because it would obstruct the case from closing. Additionally, it is a large case and comes with two pretty good fans that help with the air flow
The box is simply perfect. It fits everything, it's beautiful, it has tinted glass, two built-in fans, what else could one ask for at this price. I have a full wired power supply and it fit everything without any difficulty and without any visible cables.
The box is beautiful, quiet, and very easy to assemble. Although it had no instructions on where each screw goes. If you know a little about computers, it's easy.
Quite sturdy and beautiful. I transferred my 10-year-old PC there and it was renewed, without facing any particular difficulty. Plenty of screws and accessories. It's worth its money.
Edit 03/2023
After several upgrades of MB/CPU/RAM, including air CPU cooler (Arctic Freezer 34 eSports Duo) and GPU (RX 590), the case stands very well with good spaces, satisfactory airflow, good temperatures, and sturdy quality. It's not at the level of the H510i I bought for my son, but I am satisfied with the purchase.
The glass front of this box is slightly tinted and it's very spacious. The only downside is that it's closed from the front and air only passes through the opening next to the front panel
Value for money. It's worth 100%. Very quiet and sturdy. It also includes two fans in the package that are quite satisfactory, so you don't need to buy separate ones. It's perfect for its price.
 Kolink Stronghold Midi Tower Computer Case with Window Panel Black |  Kolink Observatory HF Mesh ARGB Gaming Midi Tower Computer Case with Window Panel Black |  Corsair 4000D Airflow Gaming Midi Tower Computer Case with Window Panel Black |  Cougar MX330-X Midi Tower Computer Case Black |  Deepcool Matrexx 50 Gaming Midi Tower Computer Case with Window Panel Black |
|---|---|---|---|---|
| from 55,70 € | from 63,32 € | from 89,00 € | from 52,89 € | from 49,62 € |
| ManufacturerKolink | Kolink | Corsair | Cougar | Deepcool |
| Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz |
| SizeMidi Tower | Midi Tower | Midi Tower | Midi Tower | Midi Tower |
| More Specs |
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books
