I received a damaged product and when I messaged them, they said that the packaging I sent for repair was not organized and I received it again damaged

With MSI B550M PRO-VDH WIFI motherboard and AMD Ryzen 5 5600G processor, at 3600MHz, replaced the corresponding ones at 3200MHz

It was installed on an Asus B450M-A with an R5 5600X. Although the exact code was not on the supported list, but it was a similar kit from the same company, it worked right away. It even loaded the XMP on its own. They work flawlessly and haven't had any issues. More stable than the Fury X I had before

Update 2:
I raised the VSOC and VDIMM from the bios, and the pc booted normally with xmp.
Update/Correction: After searching for what might be wrong with the frequencies, I found that it also depends on the processor if it can give 3600 in xmp profile. Above 3200Mhz there may be a problem. So it's not a RAM issue. I will increase my rating:

On B550 aorus elite V2 at 3600Mhz with xmp profile, the pc does not boot. I reached up to 3300 and it opens. I don't know what might be happening on other mobos but it should work normally at 3600.

This specific memory does not achieve the expected speeds according to the profile description at 3600mhz.
My computer consists of the biostar b560mx-e pro motherboard and the processor is the I5 11400F.
The highest speed I was able to achieve was at 3333mhz by selecting the profile in the bios.
I believe that the RAM modules I purchased may be defective.

The extreme memory scenario for DDR4 platform. It's barely worth it anymore to switch to a DDR5 setup gradually instead of investing in something like this, especially if you have up to 3rd generation Ryzen or 11th generation Intel

What it promises and at a pretty good price for their speed/frequency! With the prices that these memories have reached, and their excellent performance, it makes their purchase very advantageous now, even if you already have 16 (as an extension/upgrade to 32), compared to transitioning to a new hardware platform, much more expensive, just to have DDR5 at a higher theoretical speed with minimal practical benefits and disproportionate price (at present)

The first set I bought had a problem, resulting in random crashes. After replacement, everything is fine. They work flawlessly at 3600 with the ASHrock B550M Pro4 motherboard and the r7 3700x.

Since I got it from her, I have overcome all the problems of delay with my computer.. IT IS A LIFESAVER!

Flawless memory modules. I have a set here for a while now, since the Alderlake came out and they play without any problems, with 12400f+MSI z690-P. Now I also got a second set, for 4X8, and tried something I hadn't done before. I set them to run DDR4-4000 in G1, with a current of 1.37V and they work great again. Used for gaming.

They are not intended for AMD systems... they don't even reach 3000MHz, they were tested on 2 different systems.

The memories worked perfectly and my motherboard recognized them immediately. However, after 6-7 months of light to moderate use, they started causing problems and my computer would randomly restart.

UPDATE: After replacing the faulty modules, the new ones are working as they should.

The 32GB, with code F4-3600C18D-32GVK (2 modules of 16GB), are not compatible with B550-A Pro and 5900X. The Windows start but the computer crashes immediately after.

They work without any issues at 3600 with XMP for the 16GB 2x8 F4-3600C18D-16GVK Ryzen 5600G MSI B550 A Pro. For other motherboards, check the QVL of the motherboard or the memory

Great performance, paired with AMD RYZEN 5 5600G.
Unfortunately, it doesn't reach 3600mhz, but after communication, it was found to be a processor issue.
However, it runs smoothly at 3200mhz and consumes less power!

It does not sync with my b450 aorus pro motherboard! I have an AMD 2600x CPU and maybe it works on Intel!