Set the delivery location to see products according to your choice.
AustriaEnglish
BelgiumEnglish
BulgariaБългарски
CroatiaEnglish
CyprusΕλληνικά
CzechiaEnglish
EstoniaEnglish
FinlandEnglish
FranceEnglish
GermanyDeutsch
GreeceΕλληνικά
HungaryEnglish
IrelandEnglish
ItalyEnglish
LatviaEnglish
LithuaniaEnglish
LuxembourgEnglish
MaltaEnglish
NetherlandsEnglish
PolandEnglish
PortugalEnglish
RomaniaRomână
SlovakiaEnglish
SloveniaEnglish
SpainEnglish
SwedenEnglish
© 20[0-9]{2} Skroutz SA All Rights and Lefts reserved. FAQ | Terms of use | Privacy Policy | Cookie Policy
Key features:
Selected Store
Stock 1 piece
Skroutz Buyers Protection & 2 years warranty
Graphics Cards
Water Cooling Systems
CPU Cooling Fans
HDD Hard Drives
Memory RAM
Prices are calculated for:Malta, Other Payment Options
Hide up to five storage devices with an adjustable and removable cage under the power supply cover and dedicated SSD mounts behind the motherboard.
A total of seven fan positions allow for extensive air cooling. Two Fractal Design Dynamic X2 GP-12 fans come pre-installed for maximum airflow, minimal noise, and a lifespan of 100,000 hours.
It also supports water cooling up to 360mm in the front and up to 240mm at the top.
The filters can be easily removed and cleaned.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Beautiful, minimal box. Very good build quality. The box looks sturdy in all aspects and the smoked glass on the side gives it a premium feel. It doesn't creak from the vibrations of the fans. Quite spacious for its size, it will even fit larger GPUs. There is also space for several HDDs and SSDs and the liquid cooling can easily be attached both in the front and on top. Although somewhat compressed, the space for cable management has the appropriate "passages" so with a little patience and good arrangement of the power and SATA cables, you can create a visually clean system. Also, the filters it has are quite good, keeping a large part of the dust out of the case. The fact that it has a headphone and microphone jack in the front is also a positive aspect.
Now, onto the more mediocre aspects. It doesn't offer any amazing sound insulation and if you have noisy fans, you will hear them. The airflow is satisfactory, but the front panel, although a work of art, is quite compact, reducing the airflow. I would also like it to have some additional USB ports on the front. The two it has are not enough.
The case is beautiful and above average in all aspects. You won't regret buying it, but at this price point, there are several alternative options in the market to consider.
Nice box with very good construction, essentially one of the boxes that advanced the "airflow/mesh meta* in the industry. Although it remains a very good case, in 2021 there are better options on the market for this price range.
For those who want this specific case either for design reasons or others, in order to turn it into a truly competitive case in terms of airflow, you will need aftermarket fans, at least for the 2 front positions, and the 2 existing ones can be placed at the back and top. Although the airflow is good, the mesh + filter in the front creates a lot of resistance and the stock fans alone are not enough for good results (to avoid any misunderstanding, not that the stock setup will have any issues, I still run it like that myself a year and a half after purchase).
Also, the better the forced airflow of the case, the better the dust filters will work because the air will be forced to enter only through them into the case, while all the other openings with less filtering will have positive pressure, so they will only expel the air.
In terms of sound, it doesn't have anything to seal the noise inside (logical for an airflow case), but due to its construction, there are no other vibrations or things that cause noise. Additionally, the good airflow can keep the other components at the desired temperature without straining the fans, making the whole system quieter in the end.
Delicate little box to put in the living room, looks high quality but the glass is very thin which means it needs to be handled with care because it breaks very easily. If you're a perfectionist, you can make a very beautiful box with enough airflow if you add Noctua fans. The 4 stars are for the glass which would be good if it was slightly thicker, I'm talking about the white version. It has fit the Noctua D15 cromax together with the 3080 ventus oc of course, along with 2 140mm fans in the front, one 120mm fan in the back, and one on top, and the result is incredible.
It is a very good value for money box. I searched a lot before buying it, it's worth it guys, it has everything from filters to cable management, everything
POSITIVES
+ If you want the best airflow on the market in terms of quality/price, you don't need to look elsewhere. More airflow, more satisfaction.
+ The quality is more than satisfactory (buttons, plastic, glass, and metal).
+ Tempered Glass
+ Relatively spacious
NEGATIVES
- Cable management: The space from the cables to the power supply to the hard drives is too narrow. You will definitely need very short SATA cables. So make sure you have purchased 20cm SATA cables so you don't have to fold them.
Otherwise, they will fold and create a very awkward cable management situation for the hard drives, to the point where the socket of a hard drive can break if you are not careful. Generally, cable management for the hard drives is quite narrow and somewhat awkward with the cables. This is my opinion based on my limited experience.
I searched a lot for a case in my measurements and really the only thing I found is this one. It has everything. The airflow is excellent since it is full mesh in the front and allows a lot of air to enter the system, the cable management as well as the build quality are top-notch for its price and I find the design quite attractive (especially with dark tempered glass). The case comes with a detailed and useful manual (which you can also find online and learn various features of the case before purchasing) along with 2 120mm fans that are nothing special but they do their job to some extent. Its space is satisfactory for most systems, it can fit graphics cards up to 315mm (including a front-mounted fan). It has space for 3 2.5" SSDs at the back and if I'm not mistaken, 2 or 3 3.5" hard drives. The only problem I personally encountered is that under the motherboard position there are holes for passing various cables and the PSU (Corsair TX650M) was wide enough to almost completely block these holes, resulting in only the cables for the fans and such passing through. Other than that, I believe the case is excellent for its price and I am fully satisfied.
I searched quite a bit before settling on this specific case, I saw that in comparative tests it had some of the lowest temperatures, not only compared to cases of similar size and price but in general, and so far my usage confirms this. I should note here that I have removed the front 120mm fan and added two 140mm fans for even better airflow because I am using air cooling (Be quiet Dark Rock Pro 4) on a processor that is recommended for liquid cooling. The case houses a Ryzen 9 3950x used for CPU rendering and despite the fact that the machine often works all 16 cores at 100% for hours, I have not seen the processor temperatures go above 70-75 degrees and the fans remain at low RPM. At idle, the temperatures are below 40. Certainly, other factors help as well, such as the motherboard and cooler, and the settings one makes on their fans, but it is definitely significant that the case is perforated in the front. Otherwise, it is small and convenient to have on the desk, it is well-built and looks high-quality and attractive, it is convenient for cable management, and because it has good airflow and the fans do not spin at high speeds, it is relatively quiet. Beyond that, there are certainly many options and one may find cases that are more affordable, perhaps even more aesthetically pleasing or quieter, but I don't think it is easy to find a case with better airflow.
The box was recently purchased.
MB Asus ROG Z390 E Gaming.
i9 9900KF.
GPU MSI 1650 Super.
Trident Z 16GB non-RGB.
AIO Fractal Celsius S24.
3 Corsair fans Pro LED.
PSU Seasonic Prime GX 650W.
CableMod extension cables.
Words are unnecessary. The build quality is simply excellent. Don't be fooled by its small size. It can fit everything, even slightly on the edge
Flawless in everything, the first time I saw it I was surprised by how small it is. It reminds me more of a mini case than a Midi Tower. It managed to fit the Sapphire RX 5700XT Nitro+, Kraken X62, and 2 Noctua fans 140mm in the front. Flawless airflow and with the addition of the two front fans, the temperatures dropped even further than the stock
A-R-I-S-T-O, and just to be a little nitpicky, I have a small complaint about the spaces, in my knowledge though. Otherwise, everything that the others say and even more so.
Beautiful, but without spaces! It is difficult to add additional cables to the power supply if you have already installed it. The positions for the SSDs are only convenient if your power supply ends in a straight line instead of being angled. The top filter seems cheap for its price.
The box is incredibly good. The air has flawless flow from everywhere, minimal dust escapes from the filters towards the inside, and the only thing that may not fit is a custom watercooling loop. 5/5
I had an accident with this particular case because as soon as I received the product and ALWAYS according to the instructions, I went to remove the panel, which is the glass, and it simply shattered in my hands as soon as I touched it! After some research, I found out that this has happened to several customers for no reason. The company is reliable and will compensate me for the damage soon. So, 5/5 because the support from Fractal Design is excellent!
Even though it wasn't available, I wanted it so I was patient. It's worth 100%, I built my first desk from scratch and the cable management was a piece of cake. Also, the airflow is unbeatable! I highly recommend it!
I will start by mentioning my build.
MOBO: ASUS PRIME X370 PRO
CPU: AMD Ryzen 3600
RAM: Corsair Vengeance 2x8Gb
GPU: Sapphire Radeon Rx 590 8Gb Special Edition
I have the version with the dark glass. Amazing case in which I made my first build. As a beginner, I had no difficulty. Very easy cable management with the front panel cables already tied. It also has holes in the back for using zip ties for the remaining cables. Very good airflow, which was the reason I chose this case. CPU temperature with stock cooler is 49C. 2 fans pre-installed (1 front and 1 rear). It has 2 removable dust filters (1 drawer-style at the base and 1 magnetic on the top of the case). It also comfortably fits the mentioned graphics card. However, I think graphics cards with 3 fans may not fit.
As for aesthetics, I consider it a very beautiful case to put on a desk. The design on the front is something special and gives a nice feeling. Despite the dark glass, the LEDs of the GPU and MOBO are more visible.
The only negative is the limited availability in Greece. When ordering in early August, only 2 stores had the product available. One store only accepted credit card payment and the other could deliver it in November!!! Greece, your greatness! So, the purchase was made from a German store and shipped with DHL.
After a lot of searching through reviews, etc., I ended up with this one, rightfully so! In terms of space and airflow and dust filtering, it is unbelievably good. With an ATX motherboard, there is plenty of room to fit your hands during installation, and it also has satisfactory provisions for cable management. The quiet fans and convenient filters - one with a magnet on the top and one sliding from the bottom - are impressive, while the quality of the Tempered Glass is excellent! From what I've found - and I searched for a long time to be sure - it is an excellent choice for the money!
UPDATE, then, 2 months later. The filters, after cleaning 2-3 times - with a vacuum cleaner that I have and is handy - have kept so much dust that the inside of the case is - without exaggeration - like NEW! If I was 99% sure about what I wrote 2 months ago, now I'm telling you that I'm 100%. F-ing buy it!
RE-UPDATE
I recently bought the MSI GeForce RTX 2060 6GB Gaming Z, it fits comfortably inside and the temperatures don't exceed 70 during intense gaming. The condition inside remains clean as can be, with regular filter cleaning.
Amazing airflow and very good build quality!
If you add front liquid cooling, you have 28cm of free space for a graphics card! It requires a little attention in this part
I got it from HITECH store. It arrived on time. Very polite, informed via email with a Hyperlink and a voucher number for the courier, continuous updates. I would buy from them again, I was satisfied.
As for the case, now the airflow is very good. Noise, although small, will only be heard at full load and when the fans are above 87%.
Beautiful in space, the tinted glass is the most beautiful thing, the RGBs look even nicer.
Construction quality is very satisfactory. I did not expect it to be so quiet, even though I used two 140mm fans, one in the front and one on top, instead of the fans that come with the case. Everything is flawless and without surprises, meaning I don't have to remove something in order to install something else that should have been installed first. The only case where this applies is if you want to remove the drive cage, which needs to be removed before installing the power supply. Cable management is a joke, easy, and overall, if it had a spot for a 140mm fan in the back of the case instead of the current 120mm, it would be super perfect. Now it is simply perfect.
First of all, I should mention that this case is designed purely for airflow, with a nice mesh idea in its design.
-------Construction:
It seems to be a quality construction for its price, where the manufacturer has taken into account many details that make it a very good choice, besides its main purpose, airflow.
---------Assembly:
Excellent and easy cable management with plenty of space to work, as well as easy/flexible assembly.
---------The case features:
1. Magnetic filter on the top, and a filter that covers the entire bottom of the case and can be easily removed like a drawer, simply by pulling the special handle on the front of the case.
2. Thumb screws, which are non-removable for the side panel and have special protection for avoiding scratches on the tempered glass during unscrewing.
3. For cable management, you will find a scratch tape on the back (very useful), holes in the right places for cable ties, and holes for cable routing in the front with a rubber cover.
4. Two pretty good Fractal Design 120mm 3-pin fans that have very good performance in stock configuration.
Certainly, there are some details that I will add in the future.
-----=====--------======----------=======--------------=======-------------
Now let me tell you about performance:
Threadripper 1920x Build
Noctua TR4 U14 cooler
----------Noise:
I would say that it is a case that you will hear when things heat up and the fans increase their RPM. However, it is not something annoying, and as long as it keeps the temperatures at low levels, I am satisfied.
-----------Temperature:
This is where things go very well, as for the Threadripper, which is a hot processor, the temperatures with the stock fans and the Noctua remain at 21-27 degrees Celsius at idle/light use and 55-60 degrees Celsius in full stress test with 100% CPU usage.
-----------Final Conclusions:
In the end, this case combines excellent airflow with very good functionality and a nice appearance thanks to the nice mesh on the front and the tinted tempered glass on the sides of the case.
I highly recommend it.
Cheers!
.
1.
An amazing minimal and very beautiful (in my own eyes) case. It provides ample space to work on and enough room for cable management to make the case look very "clean" and as minimal as possible. The airflow is excellent and keeps my components cool. It has a sturdy construction and is well-designed, taking into consideration the routing for cable management and how spacious it is without any extras that would hinder the installation of a large graphics card or a large and bulky radiator.
The only drawback (not so significant) is its price, which remains at 90-100 euros, while you can find it externally for $70, which is equivalent to 61 euros give or take a few cents due to the fluctuation of currencies.
It is a very good case! Solid and sturdy, with plenty of space at the back for cable management. The glass is huge and doesn't hide anything at all.
The only thing I would like a little different is the space at the top for installing the cooler. I couldn't fit the 240mm AIO cooler from Corsair for less than half an inch, but the blame mainly goes to my motherboard.
An extra positive in its construction is that you can install the front fans without removing the entire front part, but only the dust filter.
From an expensive (160€) Full Tower with very good airflow for gaming, I went to this case for its size. In the end, its small size made cable management easier internally, but it also lowered the temperatures, I imagine because the fans got closer to the CPU and GPU.
The only small negative is the space for HDDs in front of the power supply, which is a bit small and may make installation a bit difficult the first time.
I think there shouldn't be a case under 150€ right now that can compete in terms of overall appearance, functionality, size, and thermal performance.
Awesome construction quality, beautiful, has very good airflow due to the perforated front panel with normal noise. It has 2 good pre-installed fans and filters on all inputs.
Really easy to build in this case, Everything is modular and perfectly constructed! I highly recommend it!
Fractal's cases are the best on the market. At first glance, they may seem relatively basic, but as soon as you see them and start setting up the build, you realize how high-quality they are and, most importantly, how much work they have put into their internal design. The company's motto "limited only by your imagination" is not a coincidence
Fantastic case, very good air flow and as quiet as can be. When I opened the PC, I was checking to see if it actually started because it is completely silent. The assembly and cable management are a breeze. The filters are very good.
Truly a quality case, I didn't expect anything less from a company like Fractal.
For me, with everything it offers, it's a great value for money at 83 euros that I bought it.
Quality
Quiet
Cable management
Airflow
Space (Asus RTX 2080 STRIX)
Satisfactory dust filtering
Build
Z390
i7 9700k
Asus RTX 2080
32GB Ram
970 evo
Aio Fractal Design 240mm on the top
Prefer it without hesitation!
Valuable - spacious and high-quality box
As a first impression, it gives you the feeling that it is very small as a box, but the space it offers is more than enough if you want a compact system.
The only "negative" things to watch out for are the glass, as it breaks easily, and be careful with large graphics cards and water cooling, as you may have a small space issue if you don't calculate correctly.
For example, the Arctic Liquid Freezer 240 (4 fan) barely fit on top (it slightly touches the RAM), and it definitely couldn't fit in the front
Excellent case with plenty of space for computer components and cable management. You can install an SSD either in the tray behind the motherboard or in the HDD trays. Be careful, if the SATA cables (power and data) form an angle, you will need to place your SSD in one of the two HDD positions. Otherwise, get flat cables.
The case has excellent build quality, the filters are great, and the side window is very nice, even though it is dark. Those who want lighting will still be able to see, don't worry.
I highly recommend it.
 Fractal Design Meshify C Dark Tempered Glass Midi Tower Computer Case with Window Panel Black |  Corsair 4000D Airflow Gaming Midi Tower Computer Case with Window Panel Black |  Be Quiet Pure Base 500DX Gaming Midi Tower Computer Case with Window Panel and RGB Lighting Black |  NZXT H5 Flow Gaming Midi Tower Computer Case with Window Panel Black |  Lian Li Lancool 216 Gaming Midi Tower Computer Case with Window Panel and RGB Lighting Black |
|---|---|---|---|---|
| from 157,38 € | from 89,00 € | from 106,95 € | from 92,74 € | from 131,73 € |
| ManufacturerFractal Design | Corsair | Be Quiet | NZXT | Lian Li |
| Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz |
| SizeMidi Tower | Midi Tower | Midi Tower | Midi Tower | Midi Tower |
| More Specs |
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books
