It requires a little attention during installation so that the glue doesn't run... but after that, you forget that you have it. Crystal clear image, doesn't retain fingerprints, and protects the screen (personal experience from a previous identical membrane where the phone fell and the protection broke but the screen remained intact)

If you have never done this process before, better leave it. Get another one. As soon as I tried to put the glass on, all the glue came off. The most wasted 15 euros I have ever spent. Also, the plastic device that you place the phone on to do the whole process has nothing to do with the instructions. It shows one thing in the instructions and there is another thing in the packaging.

I have also installed many screen protectors. I followed the instructions as someone else here mentioned, did everything correctly, and the adhesive ran everywhere while the phone was placed on a table! It wasn't even tilted. It didn't stay on the screen as it should have. I was rushing to clean my phone... Unbelievable! 15€ wasted just like that.. I wouldn't recommend it to anyone.

After being informed by YouTube, I put on plastic gloves and proceeded. I carefully wiped with the wet wipe and finished with the sticker that removes any dust. I let the liquid drip in the quantity and spot indicated by the video, and gently placed the screen protector. It started spreading everywhere and when it finished, I noticed 5-6 very small bubbles in the center. Pressing to guide them to the edges, I pushed more liquid on the sides of the phone, so I canceled the process as I didn't want these leaks to solidify on the edges. Conclusion: If everything goes well, congratulations. If things don't go well, like what happened to me, you've simply wasted 15€. I believe that the product is good, but it also requires luck in application. I would not recommend it, given the risk of success.

Well... the packaging has everything, even a special case for a level, but it is slightly smaller than it should be and because of its material (hard plastic) I was afraid it might leave marks on the top and bottom of the phone, so I didn't use it. Before applying it, you definitely need to cover the buttons and all the ports with stickers because glue will definitely run and also make sure the phone is as level as possible on the table so that the glue doesn't spill over the edges. I had watched several related videos before installing it, so I didn't have any problems. It is very good in terms of glass quality, it doesn't cause any blurriness on the screen, it has a very nice texture, and most importantly, the size is correct. I have an OEM case and it doesn't touch the screen, so there is no risk of it coming off. I am very satisfied with the result, but it requires patience and time to install it correctly.

I will give it 5 stars even though I don't have the ideal result at the moment, but I feel responsible for it because I didn't listen to a youtuber's advice not to use the guide for better application. As a result, part of the glue hardened and now it looks bad in some areas of the perimeter, plus I was shocked when I saw that it had hardened on the buttons of the device.

The materials, the completeness of the set, and the fact that it is almost impossible to create bubbles have left a positive impression on me.

In summary, I would say to anyone interested that this product is worth its money, but they should definitely search for a placement video of this tempered glass on YouTube in order to enjoy it.

Personally, I plan to keep it as long as it lasts, and if it comes off, which I don't think it will, I will buy it again.

P.S. I am using a silicone case and there is no issue as it has a slight difference with the screen.

Everything is good. The only problem is when you place it, you need to be careful because if it doesn't go straight and you try to straighten it or press it to remove air from certain points and the glue comes off, then it may not apply correctly and it may look like it has bubbles. That's why you need to be very careful when placing it. Otherwise, it is very good if applied correctly.

Excellent. Highly recommended. It is important to be accompanied by the external protective case, otherwise it cannot be installed.

Well, I have been using it for almost a year, it hadn't suffered anything until it fell from the balcony during the summer, not too high but still a balcony, and the only thing it suffered was 3 cracks. From then on, every time it fell due to my stupidity, it would get small cracks. So yes, it is very durable if you don't mistreat it, and as for its application, it is perfect. The installation will give you a hard time, but it's worth it because it covers the entire screen without cutting off any parts. I highly recommend it!

I have been using it for a while now. And that's because I have installed over 4-5 in the span of a year.
The phone doesn't fall often - but whenever it has fallen, the glass has cracked. Sometimes from a ridiculous height, sometimes from a slightly higher one - but in every fall, it cracks.
So, its durability is probably greatly reduced.
Despite all of the above, the screen of the phone has never scratched, so it is properly protected.
The installation is not the easiest - but that happens with all tempered glasses of this type.
Compared to two different brands I had tried in the past, the installation here is easier because it contains the right amount of adhesive in the tube - a little more. It gets a little messier due to the extra amount - but at least the adhesive is enough to cover the entire surface without difficulty.

A thick screen protector with low durability. Every time it has fallen, it has suffered a crack, despite having a UAG case. In terms of handling, it takes some getting used to, especially for those who are accustomed to using the edges of the screen. Also, I don't know if this happens with every screen, but the colors of the pixels (green and purple, to be precise) are visible on the edges of the glass in horizontal lines. I wouldn't buy it again, but I also don't know much about glass and manufacturing companies since this is my first purchase

Another mediocre screen protector. The case-stand is a joke. It opened up like a banana peel as soon as I put my phone inside. It is only necessary to keep the phone upright because otherwise the phone tilts due to the protruding cameras, resulting in all the glue spilling out. The amount of glue is excessive. It doesn't affect any case because it is short on the top and bottom. The functions of the phone and the fingerprint sensor work normally.
The screen protector initially stuck very well, or so I thought, but after 3 days it started to come off slowly. The flashlight didn't work when I tried to use it with 2 different power banks. However, it works fine when connected to electricity.
I consider the other comments to be exaggerated. It's another 15 euros wasted

Flawless product, durability will be proven in practice (the plastic guide didn't help me much and I did it without it + significant note, you covered the volume buttons, etc. because if it gets in there, cleaning is difficult).

It came off on the 3rd day after a small pressure from the case. I will put another one to give it a chance, if not then there is nothing else worth it anyway, I will have it naked

I would also give it 5 stars because it is by far the best glass out of the 6 others I have already tried. All the others (although until I tried this one) seemed good, but in reality they distorted the image and didn't fit well, resulting in them coming off easily. However, I won't give it 5 stars because it is difficult to install. Specifically, it comes with a case that goes into the phone to properly position the glass. The problem is that the case didn't fit my phone. It was too small and required a lot of force to put it in. I was afraid of damaging my phone until I managed to put it in.
So, I installed it without the case and even though I didn't install it completely straight, it seems to have stuck very well, and finally I can see without blurriness, fingerprints, and smudges. That's when I realized that until now, I hadn't put on the RIGHT glass.
I recommend it. I will definitely buy a couple more at the first opportunity

Finally something worth its money. The only negative thing is the moderate difficulty in installation. Using the case that comes with it, it fit perfectly

It could be good but:
1) The liquid they provide is not enough. If you try to remove all the bubbles before hardening the glue with the ultraviolet light, the liquid will gradually overflow, resulting in not having enough at the end to do its job and not being able to effectively get rid of them.
2) You would need a second liquid and a second glass to be sure that you will achieve it

The only negative thing about this screen protector is that it requires a slightly more "specialized" installation. However, if you have installed a similar screen protector at least once, the installation is easy. Personally, I don't use the frame that it comes with as I find it difficult. Any other screen protectors I have tried have had many bubbles. This one, however, has no issues in the four devices I have used it on. Besides being durable and not making it obvious that there is a screen protector on the device, as the feeling is like touching the screen itself, the best thing is that it fits PERFECTLY on the screen. I also prefer it because it is transparent. I have tried a screen protector that had a black border, essentially making the screen smaller. With this screen protector, you can enjoy the screen at 100% and everything works perfectly (touch and fingerprint). I highly recommend it without a second thought!

For those who write negative comments, I will tell you the following...... I have put 3 screen protectors on this phone, this is the 4th one and the best of all. Firstly, it fits perfectly on the side without any gaps like the others. The installation is very easy and the adhesive does not cause any damage when applied, and there is some room to adjust the glass until it sits perfectly... The money seems to be worth it, now as for how durable the glass is, it is more or less the same as others in terms of resistance.... And with the previous ones I had, they broke at the corners but the phone didn't suffer any damage, even in falls... I highly recommend it

Very good product. I had it in my pocket while I was on the motorcycle and because it was pressed, the glass broke fortunately. I didn't change it and it has fallen twice with the screen and the glass broke again. The screen of the mobile hasn't suffered anything really. Today I will get another one to replace it.

Difficult installation but definitely worth the effort. The glass fits perfectly on the screen, it is extremely durable (it has saved me from certain breakages) and overall it is the best you can find in tempered glass.

Do not put any other screen protector.. it is the only one that does not come off and the case does not throw it away... just be careful when installing it, otherwise ask them to put it on for you at the store where you will buy it

I entered the process of writing because the product is rubbish. After 3 weeks of using the mobile phone, it suddenly started to produce bubbles. And after two weeks, the hated mobile phone came off. I followed the instructions for installation as they were written.

All these things you guys are saying are good, but no one mentions the most serious issue. If you put a case on it, it breaks and cries about the 16-20 euros it will cost to fix it. The fact that it withstands quite well is okay and the plastic from China is durable too, if you take care of the phone.

I had a similar Whitestone uv glass for six months, which broke after a fall that I still wonder how my phone (P30 Pro) survived.
I decided not to spend €40,00 again and chose to buy the t-max.
No comparison!
I made the mistake of using the frame - installation guide that was included in the package.
Result? Tragic!

Definitely watch the video before and during the application. Very good material, flawless application, moderately difficult installation method.

If someone is looking to put on a screen protector, CLEARLY this is the best choice. It doesn't come off, doesn't affect anything in its functionality. In terms of installation, it is slightly more difficult than a regular screen protector, but if someone watches a video on YouTube, they will put it on perfectly. Personally, I cleaned the screen very well and tried to do the process as quickly as possible to avoid dust (I am a bit paranoid) and it indeed went on perfectly without any flaws. I highly recommend it.

Update:
Tip: Before you start applying the liquid on the phone screen, place a level to see if the phone is straight from all sides, even if it has a slight tilt, the liquid will run down. This is the most important step, which is not mentioned anywhere. Now, all other screen protectors are a waste of money because they don't have the same application on curved phones, not at all.

One of the best choices for screen protection with curved edges. I tried 2 different tempered glasses from reputable companies and they were disappointing. Fearlessly, I recommend "dome" tempered glass for a mobile phone with a curve.