The Vorel Upper Tank Spray Gun 1.5mm 81618 is used for painting tasks. Compressed air is necessary for the proper functioning of the gun. The paint in the gun's tank and the compressed air provided to the gun create a mixture of color and air particles at the nozzle outlet of the gun.

Features:

• Getting started: Using a wrench, tighten the nozzle. Check the tightness and sealing of the compressed air supply system connections. Blow the flexible air supply hose before connecting it to the system. Before using the Vorel Upper Tank Spray Gun 1.5mm 81618, make sure it has been properly cleaned and maintained. Ensure that the container with the coating material is connected in such a way that it is properly sealed.
• Adjustable spray pattern width: The width and shape of the spray pattern can be changed by rotating the air nozzle. The shape of the pattern can be smoothly adjusted from flat to round according to your needs. The amount of coating material provided in the air flow is adjusted by the control button for the quantity of coating material. On the other hand, the intensity of the mixing of the coating material with the air is adjusted through the spray control switch. It is recommended to adjust the flow of the mixture in such a way that the smallest possible particles of the coating material are taken, thus ensuring the best distribution of the coating material on the surface.
• Work with the Vorel Upper Tank Spray Gun 1.5mm 81618: When using the gun, the distance between the gun's outlet and the surface to be covered should be maintained in the range of 10 to 15 cm. Try to direct the gun's outlet perpendicular to the surface to be coated. Avoid arc movements, as they will cause uneven distribution of the coating material. It is recommended to apply multiple thin layers instead of a thick layer.
• Air flow adjustment: Depending on the type of coating material, the quantity of compressed air should be selected by adjusting the air pressure adjustment button. If the gun is not equipped with a pressure adjustment button, the pressure should be adjusted in a pneumatic system, e.g. with a reducer.
• Nozzle replacement: Make sure to replace the entire set of nozzles. The kit includes a coating material nozzle, a needle, and an air nozzle.
• Cleaning and maintenance: After completing the work with the Vorel Upper Tank Spray Gun 1.5mm 81618, disconnect the gun from the compressed air system and empty the tool container from the remaining coating material. Clean the tank thoroughly from residual coating materials. Thoroughly clean the entire path of the coating material transfer. Inaccurate cleaning will reduce the flow performance of the coating material. Clean the air nozzle with a brush dipped in solvent. Never completely immerse the gun in solvent. Never clean blocked openings with hard objects, as even slight internal damage can negatively affect the parameters of the spray gun. After washing the Vorel Upper Tank Spray Gun 1.5mm 81618, a small amount of lubricant should be applied to the moving parts of the seals.

Tighten the nozzle of the coating material enough to avoid leaks and keep the needle moving smoothly