Set the delivery location to see products according to your choice.
AustriaEnglish
BelgiumEnglish
BulgariaБългарски
CroatiaEnglish
CyprusΕλληνικά
CzechiaEnglish
EstoniaEnglish
FinlandEnglish
FranceEnglish
GermanyDeutsch
GreeceΕλληνικά
HungaryEnglish
IrelandEnglish
ItalyEnglish
LatviaEnglish
LithuaniaEnglish
LuxembourgEnglish
MaltaEnglish
NetherlandsEnglish
PolandEnglish
PortugalEnglish
RomaniaRomână
SlovakiaEnglish
SloveniaEnglish
SpainEnglish
SwedenEnglish
© 20[0-9]{2} Skroutz SA All Rights and Lefts reserved. FAQ | Terms of use | Privacy Policy | Cookie Policy
Selected Store
Stock 5 pieces
Skroutz Buyers Protection
Power Supplies
CPU Cooling Fans
Power Strips & Wall Plug Adapters
Prices are calculated for:Malta, Other Payment Options
The thermal paste consists of carbon microparticles that lead to extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is dissipated quickly and efficiently.
The MX-4 is very easy to use, even for beginners. Its application ensures an effective way to avoid gaps between the CPU and cooler.
It does not contain metallic particles, so electrical conductivity would not be an issue. Unlike silver and copper compounds, it ensures that contact with any electrical pin will not result in any damage.
Unlike metal and silicon thermal compounds, the performance of MX-4 does not compromise over time. Once applied, there is no need to apply it a second time, as it will last for at least 8 years.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Installation on Ryzen 7700X temperature on ultra graphics COD 2K 56 degrees max! With Cooler Master 240L AIO
One of the best thermal pastes I have used on a computer! With the help of an aio cooler with 2 fans, it keeps the processor at a stable 55-60°C under stress and 30°C (depending on room temperature) without use. However, in general, I mainly use MX-4 and MX-6 and I cannot replace them with any other. It is worth using on both laptops and desktops!!
Very good paste, it may be the best on the market. It is very cheap and effective. I think it is the only way for a proper PC build
Flawless paste! Reduced the temperature on the processor by at least 15 degrees Celsius and on the graphics card by another 5!
Cheap with mediocre results. Recommended only for use on desktop CPUs where there is uniform mounting pressure. When there are imperfections in the application of the cooler (laptop/GPU), it is too fluid to cover them. It dries out quickly (pump-out effect), so you have to reapply it to your laptop/GPU every year to regain 5-10 degrees. In the new version, it performs slightly better in terms of fluidity. As long as the ptm7950 exists, pastes are meaningless.
Good and cheap paste. Generally, when it comes to cooling, don't spend a lot of money on the paste because the job it does is very simple (allowing the cooler to make contact with the entire metal surface).
I have purchased this specific toothpaste several times and I am completely satisfied. I have tried more expensive ones and didn't see any difference. Some were even worse. So, I ended up buying this one because it is a very good toothpaste at a very reasonable price
It is an excellent paste and has absolute thermal conductivity. It was installed on a PS4pro which has "logged miles" and in "heavy" games it started to shut down! The result is amazing because the temperature dropped so much that the noise was reduced to a minimum, just like when the console was new!
Before I changed the Thermal Pad and Thermal Paste, my temperature in games like Hogwarts 1080p and Pubg would reach 85-88 degrees and the fans would be running at full speed!
As soon as I applied this Thermal Paste and the 2mm Thermal Pad, the temperature in both of these games dropped to 60-62 degrees and the fans finally calmed down.
I should inform you that the card from the company had a 4mm Thermal Pad while this one is 2mm, but it didn't discourage me and I simply applied a double layer
It is very good and easy to install on the Processor. I had problems with the temperature of my processor (AMD) and when I applied this paste, it went from 80C to 40C and 50C under stress, but up to 60C during heavy gaming (e.g. PUBG Ultra, GTAV Very High). (C=Celsius degrees)
Excellent product, I tested a total of 9 thermal pastes and it gave me the best possible result! You can also watch the video with the results -> https://youtu.be/PkdkbvJLiuA
I saw various 20° as soon as I put it on the CPU and on the PS3. The PS3, in fact, does not heat up at all anymore
I put it on an AMD Ryzen 5 3600 3.6GHz today. Whatever I tried, the processor didn't exceed 55 degrees, while with the previous paste, it reached 65-70 degrees. It's worth buying it, and at the price it is, get 2-3 to have them available.
It is the best thermal paste I have used. I applied it to my HP 255 G8 laptop and it reduces the temperature by at least 10-15 degrees. It is generally well-made.
I used to say and criticize in the past that with 4.5 euros, what kind of thermal paste could it be? It wouldn't lower the temperature or work properly. I was of the wrong opinion that I had to spend 15 euros or more to get a more reputable paste to do the job. My mistake... Because in 2019, even though I am knowledgeable about computers, I had a shop assemble my PC and I don't know what paste they used. Today, after about 4 years, I changed the paste. With the amount shown in the picture, I noticed a decrease of 10-12 degrees in idle mode, so something similar is likely to apply to gaming. I will update if anything changes, but I am amazed that with 4.5 euros, it works wonders! Arctic mx4 8gr, guaranteed from the first boot!
There's not much to say, the paste is enough to apply on 3-4 CPUs, it does its job and personally I replaced old ones that were 5 years old and we're talking about a night and day difference. I specifically had 1 fan opening at a specific CPU temperature and since then it hasn't opened again, not even during intense gaming. MAX value for money, no discussion.
One of the best thermal pastes I have used and in fact several times in various builds. It is worth it and more! Stable value!
I bought the 2 grams and they are more than enough for a CPU as I wanted to change the old paste after years
Tested 2 identical graphics cards after applying MX-4 thermal paste on one of them, and the temperature differences are around 10 degrees. With the MX-4, the temperature ranges from 72-74 degrees, while with this paste, it stays at a maximum of 65 degrees.
One of the best thermal pastes you can buy and this is because: It is cheap, it has very good performance compared to more expensive "premium" pastes and also it is not conductive, so you can safely apply more without causing damage to your system!
I finally decided to try the legendary Arctic and I can say that it's worth it. On a decade-old dual-core processor (Core2Duo E8500 65W 3.17GHz), it lowered the maximum temperature by 5°C (from 68 to 63) compared to a regular silicone paste that I was using. In idle state, the difference is smaller (1-2 degrees), but still, 42°C with the stock cooler is great.
Something that impressed me is that this particular paste was quite thick and required a bit more pressure during application. Compared to the previous one that was very liquid, Arctic seemed more user-friendly to me. I recommend it.
Very good paste, I have been using it since 2019, it's worth its money, it reduces the temperature of the CPU and GPU.
Excellent thermally conductive paste, however, the grams are few, for example, for a processor with a large surface area... Nevertheless, I prefer it over all the others and I recommend it to you
It was installed on an MSI Raider63 with Nvidia GTX 2070. The temperature difference is impressive and immediate, about 8 degrees lower. Very good for its price, easy installation, it does what it promises, I think it's worth it and it's value for money.
Amazing paste, I applied it to 3 different laptops and the differences in temperature and performance are chaotic. Also, even though the small tube is quite large and enough for many uses.
I installed it on an Intel(R) Core(TM) i5-9600KF. I have changed 2 CPU coolers (the first one broke a fan blade while cleaning it). Both coolers, at room temperature of 10-20° C and with the computer idle, the processor had a temperature of 33-39° C with the factory pastes that the coolers had. When I decided to change the paste and applied this one, the temperature immediately dropped to 18-24° C. I knew that the paste plays a role, but not that significant. Anyone who has overheating issues with laptops, overclocked CPUs/GPUs, etc., it is not just recommended, it is necessary to use this specific paste.
It was installed on two laptops. On the HP Pavilion 15 gaming (Ryzen 5 4600h), it reduced temperatures from 45min-83max degrees to 32min-73max degrees, and on an old Fujitsu Lifebook Ah-532 (Intel i3 2328m), it reduced temperatures from 66min-89max to 44min-74max. I highly recommend it!
The temperatures on the gtx 1050 ti when overclocked do not exceed 75, and on the processor during maximum usage it does not go above 72. Although it is the first thermal paste I have tried, I consider it to be very good value for money.
One of the best purchases I have made. Wherever I used it (desktop processors, laptops, and graphics cards), it did a very good job, always lowering the temperature satisfactorily. I finished and bought the mx8 8gr hoping for the same performance.
My only doubt is the amount of time it will last before it dries out and needs reapplication, but only time will tell.
I put it on 4 computers that were shutting down due to overheating. I applied it as best as I could with a card. The first 3 worked immediately, the 4th obviously has some other problem that needs further investigation.
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books
