Reviews by our members

• 5

  Lampro0s

  2022-07-18

  Verified purchase

  Excellent PLA and amazing company. Finally, a manufacturer that provides a manual for its materials regarding temperatures, retraction speed, etc.
  I prefer this specific series more than the easyprint, which is not as easy to print as they claim.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 4

  Indal

  2021-03-10

  Verified purchase

  This review is about the colour: Red

  Nice Red. Clean. For me, it worked better at 210 degrees. It sticks to the plate perfectly and doesn't leave any dirt.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  8 out of 8 members found this review helpful

  Cuckoo

  2021-02-14

  Verified purchase

  This review is about the colour: Gray

  Having used over 20 kilograms of this specific material, I can say the following. Starting from the first impression when opening it, you will see a fairly good packaging compared to other economical PLA filaments (Of course, I have noticed occasionally a slightly looser packaging, but the filament has never tangled. This is the most important thing in their packaging, so that the print doesn't fail for no reason).

  Now, onto the printing. It is a PLA filament that sticks well to glass (2 euros from the glass shop) without ANY assistance, not to mention the classic blue beds. Of course, the bed needs to be relatively leveled and clean (Personally, I simply "scrape" the glass lightly with a spatula to remove any dust on the bed, which I have seen is about 95% of the reason why it won't stick).

  For the temperatures, the values vary depending on the nozzle and what you are printing. (Generally, the average temperature is around 195 for my two Ender 3 printers). For large body parts where I want strength, I personally use a 0.6mm nozzle, 0.2mm layer height, and 200-205 degrees. However, I have also gone down to 188 degrees with a 0.2mm nozzle and 0.08mm layer height for miniatures with specific geometries and designs.

  If someone has a problem with Cura and 3D printing, I have made some videos in Greek to help as much as I can. https://www.youtube.com/channel/UCrbtQ64dpXtWxcdUPgJz3Aw

  Overall, it is a very good PLA filament. Prima Creator has done a great job, keeping the positive aspects of their Easy Print PLA but at an economical price. Like all PLA filaments, you need to learn your printer and Cura, but it will definitely make the whole process easier.

  Translated from Greek · Show original

  • 
  • 
  • 
  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 1

  0 out of 35 members found this review helpful

  tarxzelda8732

  2016-12-24
  This review is about the colour: Red

  Terrible really, first of all I'm sure that this is neither pla nor abs because at 195 degrees it doesn't melt like pla but at 220 degrees it smells worse than abs, and thirdly it has terrible durability.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  Anthi_Prek

  2021-02-14
  This review is about the colour: Gray

  Good quality and nice packaging. It made printing much easier for me! :)

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  Michael_Belessis

  2019-12-10

  Verified purchase

  This review is about the colour: White

  Good material, without any problems.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report