It is easily and quickly installed in the bathroom or kitchen (application only on one supply). It is easy to use or maintain and serves everyday needs such as hand washing, dishwashing, laundry, or other functions.

It is provided with a special faucet nozzle with integrated flow regulator for installation on M22 / M24 threaded faucets for maximum performance and water saving, as well as with a connection set (T, flexible pressure spiral 3/8", 2 fittings ½’’F X 3/8’’M).

• Pressure switch to activate only when there is water flow.
• Double thermal safety for protection against overheating.
• Resistance rods for easy replacement, at low cost.
• Internal flow/temperature regulator.

The instant water heater is a type of heater that heats water in real time

It only heats the water that passes through it at that moment. There is no storage tank for hot water. This has many advantages, such as energy saving, as only the water that is used is heated, as well as longer lifespan, as there is no water tank and accumulation of salts in the heating element and other components.

It operates on electricity and is single-phase.

The instant water heater has a cold water inlet pipe, which passes through the heating element, heats up, and comes out in the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the cold water inlet is not too low.

The temperature of the water is regulated by a thermostat, so as not to exceed a maximum value. The temperatures that the hot water reaches are pre-set so that someone can use the hot water directly, without the need to mix it with cold water.

The maximum temperature that can be reached for hot water production is 50 °C, while the maximum flow rate of the water reaches up to 3.6 liters per minute. Indicatively, 38-42 °C degrees are the standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water that is used is heated at that moment. Therefore, there is savings on the electricity bill. In a traditional water heater, the unused hot water is wasted.
• The hot water used in the instant water heater is used as is, without mixing with cold water, as in a traditional water heater. This also saves water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we open the tap, hot water starts running in a few seconds. A traditional water heater takes some minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.