The Brio Top is an adjustable pressure detection controller with dry protection. The Brio Top is designed to automate the operation of single-phase electric pumps. It will start the pump based on the pressure drop in the system (opening a tap or valve) and stop it when the fluid flow is interrupted at the maximum pressure level of the electric pump (closing the tap) or when the set stop pressure is reached.

Features:

• Automatically controls the start and stop of single-phase electric pumps with absorption up to 16 A (3 hp).
• Fully replaces the traditional water system consisting of a pressure switch and pressure tank or can be used as a digital pressure switch with adjustable cut-in and cut-out limits (in a pumping system with a pressure tank).
• Digital pressure display - Operating status/error signaling via LED and notifications on the display.
• Dry run protection in case of water shortage in the suction.
• Automatic reset in case of dry run, with autonomous fault condition recovery.
• Rotating current control that moves in case of overload or rotor blockage.
• Anti-freeze protection that starts the pump when the ambient temperature drops below 4 °C.
• Anti-rotor locking function used to prevent seizure of mechanical parts during prolonged periods of pump inactivity.
• Overpressure protection capable of stopping the electric pump at a set threshold.
• Adjustable travel pressure during the installation phase via the digital display.
• Standard hydraulic connections 1 1 M.
• Installation in any vertical and horizontal position depending on the flow direction.
• Operation in master/slave configuration in double booster sets.
• Terminals for remote connection (1 input + 1 output).
• Alarm log for simple analysis of any system malfunctions.
• Removable electrical terminals for easy wiring.
• No maintenance required.

Technical details:

• Power supply: 115-230 VAC ± 10% 50/60 Hz
• Max. Rated current: 16 Amps
• Max. Total pressure: 10 Bar
• Max. Fluid temperature: 30 °C
• Max. Ambient temperature: 30 °C
• Protection degree: IP65
• Starting pressure range: 0.5-8.0 bar
• Connections: 1″ male