-5%for 2+ items or products
Selected Store
Offer's products
Skroutz Buyers Protection
Set the delivery location to see products according to your choice.
© 20[0-9]{2} Skroutz SA All Rights and Lefts reserved. FAQ | Terms of use | Privacy Policy | Cookie Policy
Selected Store
Skroutz Buyers Protection
Prices are calculated for:Malta, Other Payment Options
Made from durable material, the ZS259 car mount stands out for its refined design. The wings that secure the smartphone are lined with non-slip, soft material to improve grip levels and prevent scratches from use. It features a flexible arm with an adjustable angle. It easily attaches to any car cup holder with a size of 63-69mm.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
(+) Value for Money, without having experience with these specific accessories.
(+) The plastic base/case is not as premium as it looks, however, it is quite sturdy, user-friendly, and easy to install. Additionally, the adjustable arms and the ability to rotate the device are easily done without putting pressure on the base (suction cup). It has been installed on the car dashboard and it is perfectly stable - it also has a clip on the base that provides additional pressure to the suction cup on the surface (dashboard/window).
[(-)/Thoughts] The rubber pad it has for the phone is extremely helpful as it provides additional stability, while the hooks also have rubber pads, however, I think that for a heavy device (e.g. iPhone) they might strain the base a bit - but this is just a hypothesis, as I have the POCO X3 which is indeed a large device, but it is lightweight.
The mobile phone remains stable but it does not stick to anything in the car, it does not stay stuck even for two minutes.
I've had it for 2 years! It has gone through two heatwaves, rough roads, and it hasn't fallen off the windshield even once. It's a beast.
The only things that have happened are the following:
1) With the fluctuations in heat, the screws may loosen, so you'll need to tighten them again to keep it at the stable angle you had it.
2) Because it is stuck to the windshield, after the heatwaves, I noticed that the glue from the suction cup is dripping. If your car isn't exposed to the sun all the time, you won't have any problems.
One of the few stands that have worked well for me. The phone goes in and out very easily and is very stable. I would suggest choosing this one over another that has many reviews and its button is on the back of the phone.
It is not suitable for a relatively old car with thin blinds. They lower with the weight of the phone in the heat and break when you try to lift the phone with the mount together.
Very convenient and easy-to-use phone holder, just the glue of the suction cup melted from the heat and the holder dropped in the previous purchase I made. I will assume it was a random occurrence, unless it happens again with the one I bought now.
I have bought 2 mounts. For 1 car, the one that goes in the air vents and for the other with the suction cup. Both are perfect! Good construction, they don't move and hold the phone steady!
As a construction and especially for its price, it is a very good base. I have a bit of difficulty putting it on because the screen protrudes, so it doesn't sit well, but I will fix it somehow. I haven't tested it on a difficult road yet to see if it holds the phone.
Perhaps the best value for money phone mount with a suction cup. Extremely stable grip, adjustable for all types of phone sizes, and adjustable in terms of arm length.
I have tried both magsafe mounts and simple magnetic ones, but this is the most convenient - especially if there are other drivers who do not have magsafe phones or who are not compatible with magnetic mounts.
Excellent! Get it with your eyes closed. I secured it to the ventilation grilles, it never moves for any reason and it holds the phone very tightly as well
It looks good. The arm is a bit difficult to use, but that is something that can be gotten used to over time. It is a bit sensitive to road irregularities and not very stable, but it doesn't come off easily. For the price, it is a very good purchase.
It's perfect! For 6 euros, there is nothing else to compete with. It fits very tightly and even through potholes and at 150 km/h, it doesn't move at all!
At a very reasonable price compared to some Chinese bases that cost 20€, the mobile phone is a joke. It is a value for money product and seems quite quality, time will tell the rest. I recommend it.
I have bought many phone stands mainly with suction cups. This particular one, although it is for the air vents inside the car, is the best and most sturdy stand that I have purchased. There will always be pros and cons in a purchase, but so far, for its price and its use, I recommend it
The best foundation ever. I use it daily and it has not disappointed me. Durability and basic stability even with a case or without. I have tried many and the result was disappointing. With this base, I calmed down.
Very easy application. It holds the mobile phone securely in place and in no case does it look like cheap Chinese plastic.
It does what it promises, when you pass through potholes it shakes a little but it's not worrying, good enough plastic quality, I would try to put it even on the motorcycle, sturdy construction, fits easily even in mobile phone cases
It shows that it is the best and most stable I have tried on a car base so far in the category <10€. I will come back if it shows signs of wear.
I bought the front glass base, I put it on and for 2 months it hasn't come off even in the thought! Easy installation, perfect and convenient product, the best base you can buy for this money!
Unfortunately, for me, it never stuck to the glass. From the beginning, the suction cup couldn't even hold the weight of the base, without even putting the phone on. It is a quality construction, that's why I give it 2 stars. Because the box was torn, I can't even return it. What a shame!
I have it for 2 months now and permanently attached to the surface of the car's central console and despite the very high temperatures under the sun, the base remains very stable and equally functional
I am very satisfied. It is very stable and very easy to install and remove. I did not want the other bases that stick to the dashboard/glass firstly because they come off and secondly because I did not want my phone to be visible from the outside. The only problem is that it occupies the only cup holder in my car! Definitely worth its money.
Very quickly the base came off from the point where I had put it and since then it is not stable and it keeps falling constantly.
Just got it and I don't have much to say... beautiful design, quick installation, everything is great!!
I have tried various models, with suction cups and clips and others - in my own car only this model here does the job.
The base is very good only for glass, it suctions very well on the windshield, unlike the dashboard which doesn't suction at all even on smooth surfaces.
Very good base especially for its price. It was easy to install and so far it is very stable.
I bought it after the encouragement of the salesperson in the store, I had doubts, but in the end it met my expectations..!! The grip on the air vent is commendable, the hook is made of sturdy material and tightens very well. The quality will show over time. For now, a very positive first impression after the purchase. I recommend it..!!
Very good product. What it offers in relation to its price is perfect. Very good construction, easy installation, and it doesn't move during use. Honestly, I was very hesitant because of its price, but I highly recommend it. It can be placed on the windshield, dashboard, anywhere. It does its job perfectly and is really good for its price.
A decent base, good price, and stable.
Very good construction. I got the one that goes into the air vents. It didn't move at all in potholes, the sides tighten and connect perfectly with the device!
Today I received it and tried it already. The base is very sturdy and the hook that goes into the air vent is metallic, it unscrews and screws in to tighten. Very good, worth its money!