These irrigation programmers operate on electricity, and each programmer comes with its transformer, which is internally placed inside the box or internally depending on the model (indoor use). The transformer has an input of 220V - AC, 60 Hz, and its output is 24V - AC, 1.0A with a maximum output per station of 24V - AC 0.56A so that up to 2 solenoid valves can be connected per station.

• 365-day calendar.
• 3 programs, A, B, C
• Great flexibility in choosing watering frequency.
• Easy adjustment of watering time from the screen, in 10% increments, allowing quick adjustments of water according to weather changes.
• Large liquid crystal display with user-friendly icons.
• Programming is easy without the need for English knowledge.
• Option to activate/deactivate which days of the week watering occurs. Ability for different days per different program.
• Compatible with all weather sensors.
• Can be connected to rain, humidity, temperature, or wind sensors.
• Maintains the program even during a power outage. Has the capability to install a battery for even greater assurance.
• Start times: 4 per day, per program for up to 12 daily starts.
• Operating time per station: 0 minutes to 4 hours in one-minute increments.
• Automated chronological start sequence/start time.
• One start button and manual in advance.
• Seasonal adjustment: 0% to 150%.
• Electronic short circuit detection.
• Battery: 3V lithium (included) for remote programming and timing, not required for backup program.
• Programmable delay between stations.
• Programmable sensor input from the station.
• Initial program can be stored in memory and retrieved later if needed.
• Programmable rain delay from 1 to 7 days.
• Programmable day off allows specific day(s) to be set as always "off".
• Quick Check Hunter™ helps troubleshoot field wiring issues.
• Program test function allows quick system check.

• Easy Retrieve™ Memory
• Compatible with Hunter Clik sensors and other micro-switch type weather sensors
• One-touch manual start and advance for easy manual operation
• Rain sensor bypass
• Programmable rain delay: 1 to 7 days
• Test program allows for quick system checks
• Manual cycle
• Quick Check™
• Permanent memory storage
• Automatic short circuit protection
• Seasonal adjustment (global): 10% to 150% (in 10% increments)
• Station delay (maximum): 4 hours
• Zone-specific sensor programming
• Remote operation with Hunter ROAM and ICR remotes
• Automatic daily weather-based programming with optional Hunter Solar Sync sensor