Semi-liquid polish for headlight lenses, for restoring their clarity from the early stages of clouding.
Improves brightness during night driving and thanks to its composition, removes the cloudiness from the plastic of car and motorcycle headlights.
Eliminates marks, scratches, and paint residues, while it is suitable for restoring oxidized paint. It is also suitable for polishing scooters, motorcycles, caravan windows, or plastic boats.
Easy to use, without the need for tools.
Instructions for use
Clean the plastic surface with a soft cloth.
Apply the polish with a microfiber cloth and work on the spot with circular motions.
Then remove the polish with another clean microfiber cloth using parallel motions.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
Yes, I found it good, it really polished (I used a polisher). If you let it dry on the plastics, it causes damage, so clean everything as soon as you finish.
I was not satisfied with the result. Yaris 2004 headlights that I have cleaned only at the workshop once in 2022 without good results. As others have written, I first used water sandpaper (I only found 120 and 1200) and unfortunately, the 120 filled the headlights with scratches. At least the wax that was on the headlights came off well. Then I applied the cream with cotton for at least 10 minutes on each headlight and then rinsed with a damp microfiber cloth. The result can be seen in the photos, but unfortunately, I did not take a before picture. Perhaps you should not use 120 sandpaper to avoid scratches. Anyway, the wax does not come off just with cotton as the instructions say. In conclusion, for 45 minutes of work, I don't think it's worth it. If you know a professional who cleans them well, I consider it a better option than the cream. Also, I don't know if the headlights need to be cleaned from the inside to look like new.
The photos were taken in the afternoon with a little light.
The headlights were not in terrible condition, however, they had a haze on the top part. This is the result with one hand and rubbing in circular motions for about 2 minutes with a cotton cloth.
I did two more coats. They may have cleaned a little more.
A friend told me that after washing they got a little hazy, by no means like they were. I will see it too along the way.
I didn't expect it to work anyway. As you can see, the lines inside the headlight are visible, while when it was cloudy, nothing was visible inside.
It works but it doesn't polish them like new as they say. It removes the intense yellowing. With just a polish, it cleans and the transparency comes back, but to shine it requires going over with all the water sandpapers and then polishing with a medium sponge and then with a fur
The product needs appropriate preparation in order to work perfectly! I started by sanding it with water sandpaper 800, 1000, 1500, 2000, 3000! Patience is needed to do the job correctly! Then I applied the polish by hand all over the surface and buffed it with a sponge that fits onto an electric screwdriver! After sanding it for about 3 minutes, you wipe it off with a cotton cloth or again with a wool rotating sponge on the drill!
I tried it to clean the motorcycle headlights (plastic Hella on Ducati Multistrada 620) that had not been cleaned since 2005. With the process using sandpaper (600, 800, 1000, 1500, 2000) and then applying the polish, they became almost like new. They didn't become factory new but very good. If you apply it once when washing your car or motorcycle, I believe it's OK.
Excellent choice in terms of cost, method, and time of use. For weathered Hyundai Getz headlights, the result easily compares to similar results of more expensive workshop cleaning and professional products. With a kitchen sponge and in no more than 10 minutes, the result was excellent. The duration of the result will show. Of course, I will buy it again.
It is good for headlights that are not in completely bad condition, of course with a polishing machine it can do a much better job, I specifically did it with a sponge. Honest, there are definitely better options but also more expensive. For headlights that have not completely fogged etc. it does the job, otherwise I think it is better to do something different or have a professional in the field.
The product does what it promises. I put the cream on a cotton pad and gently rubbed the headlights for about 5 minutes. I wiped with a clean cloth. 17-year-old car and quite yellowed headlights. They definitely can't be made new but they cleaned completely from the yellowing. Note that the result is similar to what I paid 30 euros to a detailer a few years ago. The rating is equivalent to the price of the product (value for money).
Well, since I read a lot, I will share my experience with this product. I had bought this cream for the headlights of my golf mk7, which had slightly yellowed. When I applied it to the headlights with a microfiber cloth and a lot of rubbing, it did absolutely nothing. I had left it aside as if I didn't have it... Recently, I wanted to fix my girlfriend's headlights on the Micra that you can see in the photos, and I did a lot of research on the subject because the headlights were in a terrible condition, as you can see. I came across this cream and its ratings. I concluded that in order for it to work, it requires sandpaper and patience. So that's what I did, sandpaper 800, then 1200, then 2000, and finally 2500. The headlight was completely cleared of the previous varnish and was ready for the cream. I put a sponge on the corner wheel, added some of the cream to both the sponge and the headlight, spread it, and started with the slowest rotations. I did not expect the result at all and I reconsidered my opinion about the product. I know it doesn't say anywhere that you need to use sandpaper beforehand, but if you want a result that will amaze you, there is no other solution. Of course, the headlights were in a terrible condition, and it goes without saying that the cream alone would not have done anything at all. I hope this helps.
Quite good result after 2 passes with cream and cotton by hand in 10-15 minutes total. I think it needs machine polishing for better results, as it left a dullness. Maybe it also needs sandpaper first. For 4 Euros, it's very good, especially if it lasts a long time, it will be superb. With the second time I rubbed with a sponge on the drill, the job was better but there is still a dullness. For its price, it's fine.
It was preceded by sanding with sandpaper, it really worths the money and more. Now we have to see how long it will last. (total working time 15 minutes)
The best thing for quick defogging of the lantern is to put a little of the product on the lantern and rub it with a dry cloth in circular motions, then wipe it with another clean cloth and it becomes new again. The question is how long it will last, we will see in the next months. So far, it does exactly what it promises
If the headlights are quite worn out, definitely use sandpaper first. For better results, use a polisher. Generally, they are not meant to remove fogging, but to temporarily give a shine.
Okay, I can't be objective because my own headlights were in terrible condition and scratched, but still, it did something. It's the first time I'm using such a product, so I don't know if it compares to others
I used the product as instructed for about 10 minutes each light, and there was a noticeable difference from the initial condition. I will definitely buy it again
INSTRUCTIONS FOR CLEANING HEADLIGHTS
First, ensure good insulation of the car's metal parts with masking tape.
Then gently clean the headlights from any dust, dirt, or debris.
Start by sanding with wet sandpaper in the following order: 800, 1500, 2000, and finally, a thorough sanding with 3000. During sanding, dip the sandpaper in soapy water to see the material being removed and prevent clogging. Alternatively, continuously spray the headlight with soapy water while sanding. This process requires patience and persistence. Approximately 3-5 minutes of sanding with each sandpaper. The total sanding time for each headlight should be about 3 minutes X 4 sandpapers = 12 minutes (or 15 minutes). The headlight will have a milky white appearance. Repeat the same process for the second headlight. I personally finish the process on one headlight before moving to the other, not simultaneously.
Next, take the rechargeable drill, the round sponge attachments specifically for drills, and the Arexons polish. Polish each headlight for at least 5-7 minutes, applying the polish on the headlight. Five "drops" of polish the size of a pea are enough for each pass (one can adjust the quantity as desired). After finishing the polishing with the polish, take a microfiber cloth or an old T-shirt and vigorously wipe the headlights.
The result is amazing. The headlights look like new.
Finally, those who wish can spray a clear varnish for added durability. I do not do this because in the next sanding, it would require a lot of effort to remove the varnish and repeat the polishing process. I stick to gentle sanding with 2000 and 3000 grit sandpaper and polishing with the polish every six months (June and December) as maintenance. Alternatively, one can apply a clear film (membrane) that is easier to remove.
Also, be cautious with commercial hardeners, as some may fade quickly and leave "streaks" on the headlight, making it appear peeled.
Today I received it and tried it directly and the result you see is rubbing with circular movements with a simple cloth, I passed it with a K2 varnish and time will tell, the machine did not do the same job there it needs rubbing with sandpaper first. Very satisfied.
Guys, the product is incredible, 2 minutes each light with cotton. Then, with clean cotton, good cleaning and you just saved 30-40 euros in your pocket!!!!!!!
It cannot clean everything, but it does remove a relative yellowing that the headlight of a 2013 X1 had. The haziness almost did not go away at all. On a 2007 Yaris, on the other hand, it had much better results.
The product does not do at all what it promises in the instructions. I got better results with cif than with this, and my headlights are not even in a terrible condition. At no point in the instructions does it mention that you should first sand with sandpaper, nor does it even mention a polish. It only explains to use it with cotton directly on the worn-out headlight. If I had known, I would have bought a complete kit with all the tools. I will reconsider the reliability of the reviews from now on.
The result is quite good although it requires a little bit of rubbing. I don't know how long it will last, but I would recommend it to anyone who doesn't mind rubbing and wants to save money to clean their car headlights.
It is the first time I clean the lights.. the result is amazing when we talk about a cost of 4 euros.. I don't know how long it will last but even if it lasts for a month, it's still worth it...
I asked at a shop outside and they told me 40 if the lights don't come out and 70 if they remove them. In the first case, they told me it will last about 2 years and in the second case, because they apply varnish, it lasts 3-4 years. I thought the money was too much, so I went for this 4 euro solution.
It does the job.. If it is very cloudy, first use sandpaper with water, then with the polish, and finally if you want a perfect result and protection, use Polytrol
For yellow headlights sandpaper 2000 water to remove the yellowing, then I did it with 5000 because I happened to have the compound with a polishing pad (3 euros for the socket, 1.5 for the pad and you have leftovers) from a Chinese for an electric drill they became like new.