If you want to be safe while driving in winter conditions, snow chains are important for improving the grip of your car's wheels. These relatively new driving accessories are easier to install compared to snow chains and are important to have in your winter driving equipment. Moreover, according to the relevant decision of the Ministry of Infrastructure and Transport, the use of anti-slip devices is mandatory for all vehicles when traffic restrictions are imposed due to adverse weather conditions.

So what are snow chains and how can you use them? Here's everything you need to know.

What are snow blankets?

Before you decide to buy a set of snow blankets, you need to know what they are, how they work, and when to use them. In addition, if you would like to make sure what the differences are with the common snow chains, this Buying Guide for Snow Chains will help you choose.

Driving with snow blankets is similar to driving with snow chains. It is a system that is placed on your tires to increase traction on snowy and icy roads.

However, snow blankets are made of a durable fabric with an elastic top instead of metal chains. The main material used in the construction of snow blankets is polyester fiber. This polyester fiber material is highly absorbent and absorbs moisture from the road, while at the same time increasing traction due to its structure.

Snow blankets generally cover the entire tread of the wheel, with most of the time even covering the entire front of the wheel, thus preventing snow from entering the rim.

In addition, snow blankets are also compatible with vehicles equipped with anti-lock braking systems (ABS) and electronic stability programs (ESP).

How do you install them?

Let's get started!

1. Park your car on a flat surface if possible and engage the handbrake.
2. Then, pull one elastic edge of the snow cover over the width of your tire as shown in the image in step 1.
3. After placing them on the top of both tires, move your car forward or backward a few meters (~1 meter) to reveal the rest of the tire, in order to complete the installation.

That's it! Easy and quick!

In the video below, you can watch the entire process above, in order to better understand the steps mentioned above.

How to drive with snow chains?

Once you have successfully installed the snow chains on your tires, you should reduce your driving speed to 20 to 30 km/h. Also, avoid rapid acceleration or sudden braking.

Safety instructions

• Use snow chains only on snow-covered roads. Using them on road surfaces that are not covered in snow will cause rapid wear and have a negative impact on the car's performance.
• Use the correct size of snow chains that correspond to your car's tires.
• If possible, always park on flat surfaces both when installing and removing the chains.
• Always follow the installation and usage instructions.
• Make smooth turns and avoid skidding.
• If you hear any unusual noise, stop your car and check their condition.
• Remove the snow chains immediately when they are no longer necessary.

Maintenance instructions

• After use, check the condition of the fabric and seams. If damaged, the snow chains should be replaced.
• Before storing them in their bag, it is recommended to dry them and wash them thoroughly with cold water at the end of each season.